Виріб |
|
Тип категорії | Log conversion and resawing machines |
---|---|
Категоріа | Circular Canters MEM |
Бренд | MEM |
Модель | TELECANT CIRCULAIRES |
Специфікація |
|
Стан позиції | Б / У |
Дата виробництва | 2010 |
Об'єм | 1 Перетворити |
Файли | |
Опис |
Reference machine: 392 / L
The Telecant is a Teletwin whose 2 ribbons have been replaced by circulars ensuring sawing of very good surface and dimensional qualities equipped with 2 CANTER at the entry of logs and circular modules, allowing to gain 2 or 4 passes by shredding the 2 or 4 slabs each time producing 2 planks. In one log pass, the machine then produces no or two boards depending on the size of the log and one / two, three or four 2-sided cores split off scoring on the table in no time. The 2-sided cores are directed to a Multilam with automatic entry or not, otherwise a 4-sided kernel optimized after quarter turn without declawing because perfect optimization during the pre-loading of the log and always split in 1/2 or 3 cores on the 4 sides to be also introduced into a multi-blade or to finish with finished sawn timber (after triple slitting in slitting mode on table always in full automatic with finely optimizable data (Travel speeds / performance sequences / sections…). At the end of slitting, the claws reposition themselves in loading mode to start again immediately on another possibly different cycle! Depending on the number of round trips, the telecant can pass up to 3 logs / minute PERFECTLY OPTIMIZED 4 AXES IN MASK TIME ... The operator has the possibility of intervening at any time in direct control ... Year: 2010 Brand: MEM Max diameter: 600mm Minimum diameter: 140mm for 95mm core Maximum log length: 4m finished Minimum log length: 1.60m Announced production: 120 to 180 m3 logs / 8 Hours Powers: Canter: 125cv (x2) Circular quad: 75cv (x4) Hydraulic unit: 50cv (x2) Alignment table with scanner with laser for choice of flow rate Automatic debit proposal to the operator Validation by the operator of the chosen rate or selection of another rate if necessary Precise circular sawing and almost planed ... Ideal for pallet boards that need to go in nailing jigs! |
Ціна і умови |
|
Вартість | Під замовлення |
Інкотерми | EXW - франко-завод (з підприємства) Країна Франція |
Продає в: | У всьому світі |
By registering you agree to our Юридичні аспекти
Інформація, яку ми використовуємо для побудови рейтингу: